Saturday, October 1, 2022

Jeep Patriot Brake Pad Replacement

Don't Miss


Is It Safe To Drive With A Brake Pad Problem

How to replace Jeep Patriot Brake Pads.

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to the brake pedal is not firm or is low there is loss of braking power assist the vehicle pulls severely to one side on braking or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

Your Brake Pads Replacement Is In Safe Hands With Our Top

We personally select every local garage based on our unique 25-point criteria, which includes staff qualifications, equipment standards and customer ratings.

Fully qualified mechanics with 10+ years experience


Your car is in the UKs safest expert hands.

Manufacturer-equivalent parts only

Identical to your manufacturers, but much cheaper!

In-house experts approve all work personally

Every service carried out by our partner garages is fully reviewed.


12-month warranty on parts and labour

Any additional work needed will be carried out for free.

Get an instant quote

Front Brake Pad Replacement

Scottish and Proud!

Religion has convinced people that theres an invisible manliving in the sky, who watches everything you do every minute of every day. And the invisible man has a list of ten specific things he doesnt want you to do. And if you do any of these things, he will send you to a special place, of burning and fire and smoke and torture and anguish for you to live forever, and suffer and burn and scream until the end of time. But he loves you. He loves you and he needs money. ~George Carlin


Don’t Miss: Patriot Pantry 3 Month Food Supply 450 Serving

What Is A Drum Brake

In drum brakes , brake shoes are inside a rotating metal drum. When you use the brakes, the shoes push outward against the drum. The friction between the brake shoes and the inner surface of the drum slows the car down. Drum brakes tend to be less efficient than disc brakes. Brake drums are usually made of cast iron or aluminum, while brake shoes are often made of steel-lined friction material.

When To Have Jeep Patriot Brake Service

2007

It’s a good idea to have your 2016 Jeep Patriot brakes serviced before a problem arises. You don’t have to wait for something to go wrong. We make it easy by providing free brake checks to all of our customers so that we can help stop problems before they start. You can ask for a free brake check at any time. Schedule one on its own or request a brake check during a regular service, like a battery replacement. If life has gotten in the way of everyday car care, keep the following brake information in mind.

Brake problems include unusual noises, a vibrating pedal or steering wheel, a burning smell near your tires, a dashboard brake light thatâs powered on, or a sensation that things aren’t like they used to be. You know your Jeep Patriot better than anyone else. Turn to our technicians to help keep your brakes at peak performance! In general, manufacturers like Jeep advise that rear and front brakes are removed and serviced at least once every 12,000 miles or 12 months. That includes checking the parking brake, too. Brake service and/or repair should be performed as necessary. Want to keep your brakes ready for anything? Stop at your local Firestone Complete Auto Care for a quick inspection. All of our 1,700+ locations offer free brake checks seven days a week. Our technicians will inspect your 2016 Jeep Patriot brakes, brake fluid level, and more! Properly maintaining your brake system is so important.

You May Like: Is Bloomberg A Democrat Or Republican


What You Will Need

  • With the wheels on the ground, loosen the lug nuts but don’t remove them.
  • Jack up your Jeep Patriot and secure it with jack stands.
  • Remove the front wheel from your Jeep Patriot.
  • Use a flathead screwdriver to put pressure between the old pad and caliper. This will press the piston into the brake caliper, which is required to fit in the new brake pads.
  • Use a 14mm socket to remove one of the guide pins.
  • Fold-out the brake caliper and remove the old brake pads and shims.
  • Install the new brake pads. Apply a small amount of grease where the brake pads slide on the brake caliper. Do not apply brake grease on the brake pad surface or brake rotor.
  • Install the brake caliper. Apply grease to the guide pins.
  • Torque guide pins to 31 Nm or 23 ft-lb.
  • Install the wheel and tighten the lug nuts. Remember to torque the lug nuts when the vehicle has been lowered.
  • Start your engine and pump the brake pedal a few times before you start to drive.
  • That’s it. You have successfully change the brake pads on a Jeep Patriot.

    Why Do Brakes Feel Spongy

    Spongy brakes are generally the result of air, gas or water inside the hydraulic system. Car brakes use a hydraulic fluid that transfers force through high-pressure brake lines. If youve got something other than brake fluid inside those lines, the brake fluid is less efficient in transferring force. That leads to a spongy feel at the brake pedal.

    The most common causes of this trouble stem from the brake fluid itself. If theres any water in the brake line, heat from the brakes can vaporize the water, resulting in that spongy feeling. Or in some cases, the brake fluid can actually boil if the brakes get too hot.

    The easiest thing to do about spongy brakes is to change the fluid. In most cases, that will get the brakes back to operating normally, unless theres another problem with the brakes. In general, it is wise to have your brake fluid changed periodically. Besides causing spongy brakes, water in the brake fluid causes corrosion that can ruin calipers and brake cylinders. Brake fluid changes are relatively cheap, so you should have it done every year or two. Thats all part of proper maintenance for your car, as covered in Top 10 Car Care Tips.

    Don’t Miss: 2008 Jeep Patriot Rear Shocks


    How Urgent Is A Brake Pad Sensor Replacement

    Its typically not possible to reuse a pad sensor, and you should replace it at the earliest along with the old pad.

    Brake pad sensors are generally designed to break, so they should be replaced whenever new brake pads are fitted. More importantly, if your brake pad sensor sets off an alert, it also means you need new brake pads.

    Why?

    If the friction material of a brake pad thins out completely, it can expose other brake parts to excessive wear. For example, the brake pad backing metal may grind against the brake rotor and damage it.

    When that happens, your vehicle can lose its braking power and become a hazard on the road.


    Such brake pad wear could also damage other crucial parts like the brake caliper. A caliper or rotor replacement can cost several hundred dollars above a brake pad replacement.

    So, if you hear grinding or squealing noises from your front or rear brakes or if the brake warning light on your dashboard is illuminated, dont take it lightly.

    Moreover, if the brake pad wear is due to a sticking brake caliper, you may also need to get your caliper piston inspected and replaced, as it can fail to retract correctly after being out so far.

    To prevent all this, you should have a new sensor installed with every new brake pad. It can alert you well in advance when you have a couple of hundred miles left to drive.

    How To Change Brake Pads And Rotors

    2011 to 2012 Jeep Patriot rear brake pad replacement

    Here are the simple DIY steps for rotor and brake pad replacement. These steps are a general outline for most vehicles.


    And when in doubt, its always better to let a professional deal with a brake job.

    • Safety first. Park your car on a dry, even surface and install wheel chocks.
    • Check the brake fluid level. If its full, remove some fluid to avoid spillage due to overflow when engaging the brake caliper piston.
    • Jack up the car, secure it with jack stands, remove the lug nuts, and then remove the wheel.
    • Remove the caliper bolts and caliper .
    • Remove the existing worn rotor and pads.
    • Inspect and clean the rotor mounting surface to ensure the new rotor sits evenly, preventing pedal pulsation.
    • Clean and install the new rotor. Once done, replace the brake hardware with new ones.
    • Install the new brake pads. Note the wear sensor position orientation to install the pads correctly.
    • Inspect and install the brake caliper using a torque wrench.
    • Access the brake fluid reservoir and ensure its filled to the max level. Then pump the brakes. Now recheck the brake fluid reservoir. Top-off again if needed.
    • Install the wheel and lower your car by removing the jack stands. Repeat the process for all wheels.
    • Finally, ensure the brake pedal is firm before you test drive. Drive easy to break in the new rotor and pad, and get comfortable with your new and improved braking system.

    Don’t Miss: How To Watch Patriots Games Outside Of New England

    What Are Brake Rotors

    A brake rotor is a metal disc affixed to a vehicles wheel hub that receives friction from the brake pads to stop the vehicle. If your car has a disc brake, it has a brake rotor .

    When you push the brake pedal, brake fluid flows towards the brakes. The fluid helps apply pressure to the brake piston, which engages the brake pads to slow down the moving wheel and rotor.

    And since brake rotors make direct contact with the brake pads, they wear down eventually, needing resurfacing or replacing.


    How Urgent Is Replacing Brake Rotors

    The brake system is a very important safety feature on your car, and thats why you must get your brake rotors checked urgently.

    A warped or bad brake rotor will hinder the functionality of your brake pads and the entire braking system compromising smooth braking.

    The warped rotor will only worsen if you delay the replacement, and the brake pads will follow.

    Don’t Miss: How Many Republicans Are In The House Of Representatives 2015

    Make Sure It Fits Your Vehicle

    From$146.98


    • Brake upgrade for the daily-driver
    • Z23 carbon-fiber ceramic brake pads
    • Upgraded braking performance designed for every-day cars, trucks and SUVs
    • Dual-layer rubberized sims
    • Better noise insulator for virtually silent braking
    • Drilled, slotted and zinc plated rotors
    • Provide maximum cooling and helps protect against rust and corrosion
    • Premium stainless-steel hardware

    From$103.99

    • Power Stop 1-Click OE Replacement Brake Kits
    • Front and Rear

    From$151.99

    • Z26 carbon-fiber ceramic brake pads
    • Designed for muscle cars and high performance vehicles
    • Premium stainless steel shims
    • Better heat dissipation and virtually noise-free braking
    • Drilled, slotted and zinc plated rotors
    • Provide maximum cooling and helps protect against rust and corrosion
    • Premium stainless steel hardware

    From$171.05

    • Fitment: Direct Fit
    • Z26 Carbon-Fiber Ceramic formula offers extreme braking performance that is designed for muscle cars and performance vehicles
    • Dust-free braking performance
    • Premium stainless steel shims provide better heat dissipation & virtually noise-free braking
    • Drilled & Slotted performance rotors for maximum cooling
    • Rotors are zinc plated for maximum protection against rust
    • Includes ceramic brake lubricant and premium stainless steel hardware kit

    Free! Curbside & In-Store Pickup:

  • Want this professionally installed??

  • Free! Curbside & In-Store Pickup:

  • Want this professionally installed??

  • Free! Curbside & In-Store Pickup:

    When Do I Need A Brake Pad Sensor Replacement

    2007

    Since a pad wear sensor is a part of your brake pad system, it doesnt need to be replaced on its own.

    You can simply get a new sensor installed whenever you get a new pad.

    Its also recommended to get your sensors inspected as a part of your regular brake service and allow a pad change when necessary.

    Recommended Reading: How Many Seats Did Republicans Gain In The House

    How Long Do Brake Rotors Last

    On average, conventional steel brake rotors last 15,000 to 70,000 miles. However, rotor wear depends on several factors, such as your driving style, vehicle, and how you treat the brakes.

    A carbon-ceramic brake disc can last a lifetime. However, even this rotors durable design can be impacted by driving style and conditions.

    What’s Wrong With The Brakes On My Jeep

    Car brakes may just be the most important safety feature on any car. Maintaining them is crucial, but a lot of people dont understand how brakes work or what to look for to know whether theyre operating properly. In addition to the obvious safety reasons, maintaining your brakes will help with resale value.

    At a basic level, cars like your Jeep use what are called friction brakes. These brakes use the contact between two types of material to bring the car to a halt. A friction brake may be either a disc brake or a drum brake.

    Also Check: Why Are Republicans Siding With Trump

    What Is A Brake Pad Sensor

    A brake pad wear sensor or brake pad indicator is a safety feature in your vehicle. It can help keep track of your brake pad thickness and alert you when its time to get a pad replaced.

    Typically there are two types of brake wear sensors found on vehicles:

  • Mechanical Wear Sensor.

    A mechanical sensor is a metal plate designed to come in contact with the rotor or brake disc when the wear has reached the desired pad thickness.So, when you hit your brake pedal and hear a sharp screeching sound, its your pad wear sensor indicating that its time for a brake pad replacement.

  • Electronic Wear SensorAn electronic pad wear sensor contains a resistor circuit that monitors the brake pad wear.
  • When the thickness of the pad material decreases, the sensor wire comes in contact with the rotor or brake disc. As a result, the circuit breaks and illuminates the brake indicator light on your dashboard.

    A vehicle can have one or more sensors installed . These sensors also come with their own software and algorithm to predict the brake pad life.

    Some vehicles may even have an electric pad wear sensor built into the OEM pads, or they could be attached separately to aftermarket pads.

    What Can Affect The Performance Of A Car Brake

    How to change your Jeep patriot front brake pads

    One of the factors that you need to look for in a car brake is the peak force. This refers to the maximum force a brake can apply. It determines how fast a brake can slow down a car. Another important factor is fade. When car brakes heat up , they lose friction and result in weaker braking force. This is known as brake fade.

    How you use your car determines what kind of car brakes you need. If you drive fast and use your brakes often, you need car brakes with superior heat dissipation. Because car brakes also wear out, you need to check them occasionally. Worn-out car brakes can cause an accident, so it makes sense to check and service them regularly.

    Read Also: My Patriot Supply Promo Code

    How Long Do Brake Pads Last

    It depends on a number of factors, including where and how you drive, the type of vehicle, and the materials of the brake pads themselves. Frequent city driving, driving through mountainous areas, or just braking abruptly more often than necessary will all decrease the lifespan of your brake pads.

    Check your owner’s manual for more detailed information about how long your brake pads should last.

    What Are The Different Types Of Brake Rotors

    Here are the four primary brake rotor types:

    • Blank and Smooth Rotors: These are simple and affordable rotors found in the disc brakes of most passenger vehicles like standard sedans.
    • Slotted Rotors: These rotors have special slots arranged around the exterior rotor surface. Theyre usually found in heavy-duty trucks and SUVs.
    • Vented Rotors: These rotors have cooling vents located between the two surfaces. Several modern cars have vented rotors on the front of the vehicle, ideal for a daily commute or even towing smaller loads.
    • Drilled Rotors: These rotors have a series of holes drilled in a spiraling design across the surface instead of slots. Drilled rotors are usually found in cars driven in wet climates, as the design can help with braking in damp and cold weather.
    • Drilled and Slotted Rotors: These rotors combine both drilled holes as well as slots set in spiral patterns around the outside of the rotor surface. Drilled and slotted rotors are usually used in high-performance vehicles like sports cars.

    Recommended Reading: How Did The Republicans Take Control Of Congress

    Jeep Patriot Brake Pad Replacement

    When should you change the brake pads on your 2016 Jeep Patriot? It depends on you and your driving style. The majority of brake pads last between 30,000 and 40,000 miles. Certain factors, like driving mostly on highways and braking smoothly, can help your brake pads last longer. If you often haul heavy loads or ride your brakes, your brake pads may wear out sooner. Your brake pad replacement timeline also depends on the type of brake pads you have installed on your Patriot. Brake pads made of certain materials tend to outlast others. Luckily, Firestone Complete Auto Care offers brake pad replacement for Jeep Patriots that comes with a limited Lifetime Parts Warranty. Brake checks and brake pad replacements are pretty common for us, and we only use brake parts that meet or exceed Jeep’s standards.

    Popular Articles