Tuesday, April 16, 2024

Jeep Patriot Oil Change Reset

Don't Miss


How To Reset Oil Change Required Light On Jeep Patriot

How to reset oil change light in Jeep Patriot

Hows it going, everyone? Its Nick back out of another tip content. Today Im going to be trying to reset the oil change message flashlight on the Jeep Patriot. So if you got this, when you turn on your Jeep, this is changed the oil. So Id be showing you guys how to turn off that light.

Jeep Patriot is equipped with an engine oil change indicator system. So if the system detects that the time has come to change the oil, the required message will flash in the electronic vehicle information center display for approximately 10 seconds after a single chime has sounded.

How To Reset Change Oil Light On The Jeep Patriot

When an oil change is due on the Jeep Patriot, the Oil Change Required light notification will illuminate on the instrument panel. You can reset this light using these steps.

  • Turn the ignition to the On position. Do not start the vehicle.
  • Slowly push the accelerator all the way down three times within ten seconds.
  • Turn the ignition to the Off position.
  • The oil change reminder light should now be turned off. If it didnt work, try these steps again. The light is programmed to illuminate every 3,500 miles to remind you to change your oil.


    These steps should work on 2007-2017 Sport and Limited models of the Jeep Patriot.

    Did these steps work for you? Let me know in the comments section below.

    Engine Oil Change Indicator System

    Oil Change Required:

    The engine oil change indicator system in your car tells you when its time to change the oil. After a single chime, the Oil Change Required notice will flash on the EVIC display for approximately 10 seconds to indicate that your next scheduled oil change is approaching. The engine oil change indication system is duty cycle-dependent, which means your driving habits may affect how often you have to change the engine oil.

    This message will continue to show up every time you turn the ignition switch to the ON/RUN position, even if it has not been reset. To temporarily turn off the alert, press and release the Trip Odometer button on the instrument cluster. The oil change indicator system may be reset by following these steps:


    • Turn the ignition switch to the ON position. Do not start the engine.
    • Fully depress the accelerator pedal, slowly, three times within 10 seconds.
    • Turn the ignition switch to the OFF/LOCK position

    Read Also: How Much Of The House Is Up For Reelection

    Is It Safe To Drive My Jeep With The Check Engine Light On

    Thats the million-dollar question. If your check engine light comes on and stays on, there are two things you can do:

  • Diagnose the problem yourself by buying an OBD II scanner and checking the engine codes.
  • Take your car to a certified professional for a proper diagnosis.
  • Some drivers feel confident working on their own cars. If so, option #1 may work. But for the majority of drivers, we recommend taking the car to a professional jeep mechanic. The issue could be anything from a loose gas cap to something more serious, like a misfiring engine. You just never know.

    Heres something else to consider: Are other warning lights coming on as well, like temperature or oil pressure? If so, then youre dealing with a major problem and your car needs service without delay.

    One more thing, and we cant stress this enough if the check engine light is flashing on your jeep, pull over immediately and stop your car. Not kidding. Theres something majorly wrong and you dont want to risk further damage by driving it.


    In the end, if your check engine light comes on, its best to heed the age-old adviceits better to be safe than sorry.

    When To Change 2016 Jeep Patriot Engine Oil

    Resetting Change Oil Indicator on Jeep Patriot Chrysler ...

    Not sure how or where to get your Jeep Patriotâs oil changed? Turn to Firestone Complete Auto Care! We are experts in car care â not just tires. Oil and lube services are also our specialties. After all, like our maintenance technician Brianna says, âOil is the blood of the engine. Itâs the #1 thing you can do for your car.â

    Jeep recommends having your 2016 Jeep Patriotâs motor oil changed at regular intervals. Check out mileage and month info for your Patriot in the above table. No matter the mileage, your Patriot may need its oil changed ASAP if your check engine light is on, you hear engine knocking, sense an oil smell in the cabin, or notice excess vehicle exhaust. You may also need an oil change more frequently than Jeep recommends if you haul heavy loads, drive in dusty terrain, adventure off-road, or go at low speeds on long distance trips. In general, being extra-diligent about oil changes wonât damage your Jeep Patriot. In fact, every oil change is an opportunity to diagnose and treat any other issues, such as bad brakes or a failing battery.

    Read Also: When Did Democrats And Republicans Switch Sides

    Is It Free To Have A Dealer Check The Check Engine Light On My Jeep

    A dealer usually charges a service fee to check your check engine light. But if youve built a good relationship with a favorite jeep dealership over the years, it never hurts to ask.


    Another approach would be to locate an independent auto mechanic who might diagnose your problem for free. Doing a little leg work and making some calls could save you money.

    Nowadays, many auto part stores will diagnose your check engine light without charging a fee. All it takes is to walk into the store and ask someone behind the counter. Or, again, ring them up and ask.

    If you cant find a free option and are curious what it might cost, the national average across all vehicles for a check engine light diagnostics service is about $131 to $209.

    Oil Reset Service Light Indicator Jeep Patriot

    How do you reset maintenance light, reset service light indicator Jeep Patriot, year 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014. For reset maintenance light and that can be made manually by use button on car dash board.

    Reset service light indicator, engine oil life Jeep Patriot, oil reset instructions:


  • Turn the ignition to run .
  • Fully depress the accelerator pedal slowly three times within 10 seconds.
  • Turn the ignition off and then start the engine to verify the indicator has been reset.
  • You May Like: Republican And Democrat Difference

    Oil Indicator Light Question

    Change Oil Indicator Lamp-On MessageChange Oil Indicator Reset ProcedureThe PCM continually monitors numerous sensor inputs to determine the duty-cycles to which the engine is being subjected. A pre-programmed algorithm within the PCM then determines when to send the proper lamp-ON or lamp-OFF message to the ElectroMechanical Instrument Cluster .

    How The Jeep Oil Change Indicator Works And What To Expect

    2008 Jeep Patriot oil change reset

    The Jeep Oil Change Indicator system is not a simple oil quality sensor, but a software based, algorithm-driven device that takes into account various operating conditions of the engine to determine when the oil needs changing. That said, the computer does not strictly track mileage or the condition of the oil – but certain driving habits that can affect the life of the oil, as well as driving conditions such as temperature and driving terrain. Lighter, more moderate driving conditions and temperature will require less frequent oil changes and maintenance, while more severe driving conditions will require more frequent oil changes and maintenance. Read the table below to see how the Oil Change Indicator system determines oil life.

    • Note: Engine oil life is dependent not only on the factors listed above, but also on your specific vehicle model, year, and what type of oil is recommended. Check the owners manual for more information about what oil is recommended for your vehicle, and dont hesitate to get in touch with one of our experienced professionals for advice.

    When your vehicle is ready for an oil change, Jeep has a recommended list of scheduled maintenance items that coincide with the mileage accrued:

    After your oil change and servicing is complete, you might need to reset the Oil Change Indicator system in your Jeep. Learn how to do this by following the directions below:


    Step 1: Insert key into the ignition and turn key to ON without starting the engine.

    Recommended Reading: How Many Democratic Presidents Have Been Elected

    How To Reset Jeep Patriot Oil Change Light In 3 Easy Steps

  • Turn the key to ON/RUN position with engine off
  • Fully depress and release the accelerator pedal 3 times within 10 seconds
  • Turn the key to the OFF position and then back on to confirm reset was accepted
  • Thank you for using Car How To and the Oil Reset Pro app. We hope you find these reset procedures helpful. Have this procedure along with the rest of the domestic, Asian, and European manual maintenance reset procedures always at your fingertips with our mobile app Oil Reset Pro available on the Apple and Google Play stores. Follow links below to download from the store for FREE now!

    Jeep Patriot Oil Change Questions

    • What can low oil do to my Jeep Patriot engine? Engine oil is a lubricant for the moving parts in your engine. If your oil runs low, engine parts can grind together, generate excess heat, and cause your Patriotâs engine to fail. Thatâs why youâre better off checking your oil levels and investing in routine lube services.
    • Can I change my Jeep Patriot oil at home? Changing your own oil isn’t as convenient as you might think. Youâll have to buy special tools and figure out a way to recycle the old oil properly. Having your oil changed professionally can not only reduce the risk of something going wrong during the service, but also help your car perform down the road.
    • Why is my Jeep Patriot exhaust smoke grayish or blue? Your engine could be burning oil due to a leak. It may be time for a pro to take a look. The leak could be caused by several issues like leaking valve seals, blown piston rings, or worn cylinder walls.
    TIRES

    You May Like: How Did Democrats And Republicans Switch

    How Do You Reset The Oil Light On A Jeep Patriot

    4.6/5How to Reset Change Oil Light on the Jeep Patriot


  • Turn the ignition to the On position. Do not start the vehicle.
  • Slowly push the accelerator all the way down three times within ten seconds.
  • Turn the ignition to the Off position.
  • Keeping this in view, how do you reset the change oil light on a 2010 Jeep Patriot?

    Per the owners manual, the way to reset the “oil change message” is to turn the key all the way untill all dash idiot lights come on , then depress accelerator pedal 3 times within 10 seconds, then turn ignition key off.

    Additionally, how often should you change the oil in a Jeep Patriot? Every 6 Months. Every six months, your Jeep Patriot will need an oil change. When you take it in for an oil change, your oil filter will also be changed and your tires will be rotated as well. Before you go, a number of parts of your vehicle will be inspected, including

    In this regard, how do you turn off the change oil light on a Jeep?

    How to Reset Oil Light/Oil Life on the Jeep Wrangler


  • With the engine off, turn the ignition switch to On without starting the engine.
  • Within a 10 second interval, push the accelerator pedal all the way down slowly three times within 10 seconds.
  • Turn the ignition switch to the LOC position.
  • How do I turn off the change oil light?

    Press the accelerator pedal down three times in a five-second period. Turn the engine on. If the oil light goes off you have successfully reset the oil light.

    Jeep Patriot: How To Reset Oil Change Light

    RESET CHANGE OIL JEEP PATRIOT

    Jeep Patriot: How To Reset Oil Change Light The Patriot is an SUV produced by Jeep from 2007 to 2017. Like the Jeep Compass, it is based on the MK platform, a variant of the JS platform. The Patriot is a four-door Jeep station wagon, similar to the Jeep Cherokee.

    Since January 2011 this car sold exclusively in the original Mercedes-Benz turbodiesel CRD 2.2 163 HP Euro 5 engine. Mechanically the suspension was changed with new springs, shock absorbers and anti-roll bars.

    Read Also: Trump Saying Republicans Are Stupid


    Types Of Motor Oil For Jeeps

    Wondering if we carry the right motor oil for your Jeep? We carry the best because your Patriot deserves the best. Check your owner’s manual and talk with a technician to select the right Jeep Patriot oil, whether it’s Quaker State® Advanced Durability⢠conventional oil, Pennzoil® High Mileage Vehicle® motor oil, Pennzoil Platinum® Full Synthetic motor oil with PurePlus⢠Technology, or Shell Rotella® heavy-duty engine oil. There’s a reason we carry these motor oil brands. They are proven winners. For example, Quaker State was shown to provide 2x more protection than the industry standard when tested in taxi fleets across the country. There’s also Pennzoil. Unlike traditional synthetic motor oils, the Pennzoil Platinum® Full Synthetic line of motor oils with PurePlus® Technology is formulated from pure natural gas, which helps lead to better performance. But don’t forget about Shell Rotella for heavy-duty engines. It’s expressly designed for gasoline and diesel engines that need to overcome the strenuous working conditions, and is uniquely fortified to offer increased wear protection, heightened performance in extreme temperatures, and improved oxidation resistance. Always refer to Jeep’s recommendations before going with a new or different motor oil for your 2016 Jeep Patriot.

    How To Reset Oil Change Light On Jeep Wrangler

    Fully depress the accelerator pedal slowly three times within 10 seconds.Fully depress the accelerator pedal slowly three times within 10 seconds.Fully depress the accelerator pedal slowly three times within 10 seconds.Fully press the accelerator pedal, slowly, three times within 10 seconds.

    Fuly depress the accelerator three times in 10 seconds.How to clear codes on jeep wrangler.How to reset jeep wrangler oil light after oil change:How to reset oil light/oil life on the jeep wrangler with the engine off, turn the ignition switch to on without starting the engine.

    I hope this tutorial has helped you reset the engine oil notification on your jeep wrangler.If it is not reset the system will be unable to properly track.If your vehicle has an ignition button, press the engine start stop button twice without touching the.Im not sure what issue your having but yes it will work on a 15 jk.

    Immediately press and release the accelerator pedal 3 times within 10 seconds.Insert into the key ignition and turn it on position without start engine.It must be manually reset.Its an important fact that how to reset an oil change light of jeep wrangler that are following below.

    Ill probably change it at about 6000.Lets assume, there was a mechanical fault, which youve since rectified, how do we go about resetting the error code?Long story short, that camaro ate 6 quarts of oil in 6k miles and seized the engine.Make sure the engine is not running and key is out of the ignition

    Read Also: Metlife Stadium Mezzanine Club

    Oil Change Warning Reset

    Freedom has a taste, and for those that have fought for it, the taste isso sweet the protected will never know

    To reset the oil change indicator system refer to the following procedure.1. Turn the ignition switch to the ON position. Do not start the engine.2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.3. Turn the ignition switch to the OFF/LOCK position.NOTE: If the indicator message illuminates when you start the vehicle, the oil change indicator system did not reset. If necessary repeat this procedure.

    And again, as written in Owner’s Manual, page 185:Nobody reads manual anymore?

    PS: Do not know if this works, still not due for oil change…

    How To Reset The 2017 Jeep Patriot Tire Pressure Sensor Correctly

    Jeep Patriot Oil Change Reset / Oil Life Reset

    The National Highway Traffic Safety Administration requires all models of cars and light trucks newer than 2008 to be equipped with a tire pressure sensor system. This law was enacted due to the high accident and mortality rate of cars and trucks with overinflated or underinflated tires being involved in tire blowouts or rollover accidents.

    Don’t Miss: How Many Republicans In Congress 2017

    Why Is The Check Engine Light On In My Jeep

    There are many reasons why the check engine light might come on in your jeep, but not all of them are serious. For example, one of the more common reasons for the light to come on is a faulty gas cap. It might need replacing or it could simply be loose.

    Sometimes a check engine light will come on when nothing is really wrong with your car. A change in humidity or other temporary changes in the environment could trigger the light. If thats the case, the light will go off by itself after a relatively short period of driving time.

    However, an illuminated check engine light could also be a huge red flag being waved right in front of your face warning you of a more serious problem. Are you releasing excess pollutants? Are you consuming too much fuel? You just never know.

    In short, if your check engine light comes on, you have two options:

  • You can diagnose the problem yourself by buying an OBD II scanner and check the engine codes.
  • If youre not the DIY type, and most drivers arent, take your car to a mechanic and let the experts do their job.
  • How Do I Reset The Check Engine Light On My Jeep

    If resetting the check engine light on your jeep is your main concern, well assume you fixed the problem that caused it to come on in the first place. That said, if the light is still illuminated after making the necessary repairs, your cars computer simply needs a little nudge to tell it things are all good.

    A few different ways to reset your check engine light are:

    • Let it go off by itself
    • Turn your ignition on and off several times in a row
    • Disconnect your battery and reconnect it
    • Buy an OBD II scanner and follow the instructions

    One of these four methods should do the trick. But lets say the check engine light on your jeep never goes off. Or it does but comes back a few days later. This means you still have a problem, and it could be major.

    At this point we recommend you make an appointment with a professional mechanic and have him or her diagnosis the cause.

    Also Check: Number Of Democratic Presidents Vs Republican

    Popular Articles