Wednesday, March 20, 2024

Jeep Patriot Rear Wheel Bearing

Don't Miss


What Are Rear Wheel Bearings

2012 Jeep Patriot rear wheel bearing assembly. How to change rear hub assembly.

If youve ever looked at a skateboard wheel, then youve probably got a decent idea of what a wheel bearing is. You know how skateboard wheels have a smaller circle in the middle of them? If not, just take my word for it. You can spin the wheel freely all you want, and youll notice the smaller circle spinning perfectly with it.That smaller circle is the bearing. A bearing is a very basic but critical component that helps a wheel spin freely and quickly. Most things with wheels have bearings, including your car. Without bearings, your wheels would just sit there.All four wheels in your car have bearings, because all four wheels need to turn for your car to operate.Your car is only connected to the road through four things: Your four wheels. Which means the wheels ultimately hold the entire support of the car. Which means that the bearings support the entire car. Which means they need to be really, really, really strong, so they can hold the weight of the car, while still allowing the wheels to spin properly and freely.Bearings are wildly simple in design, though very precise. Theyre made with a very strong steel, which helps them deal with a large amount of abuse that they take from your daily driving.As a result, your rear wheel bearings are exceptionally durable. Most cars can go their whole life without the bearings needing to be replaced.

When To Replace Wheel Bearings

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by swerving from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicles weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

Jeep Patriot Bad Wheel Bearings Symptoms Causes And Diagnosis

Wheel bearings in Jeep Patriot are one of the most crucial and stressed components. They cause the wheels to turn easily and at the same time absorb high radial and axial forces. Driving your Patriot with a defective wheel bearing can be dangerous, so you must act urgently for your safety and driving comfort.

The most common symptoms of a bad wheel bearing in Jeep Patriot are grinding or humming noise, knocking or clunking noise when cornering, shaking steering wheel, body vibration, uneven or abnormal tire wear, play in wheel, and vehicle pulls to one side when driving in a straight line.


Read Also: Patriot Power Generator 1500 Recall

Knocking Or Clunking Noise When Cornering

At an advanced stage of internal deterioration, the defective wheel bearing can cause knocking or clunking noises, particularly when turning or cornering in your Jeep Patriot. However these noises can also occur due to faults in suspension or steering system components, therefore you should consider a bad wheel bearing if the vehicle presents other system as well, like humming or grinding noise and play in the wheel.

Play In Wheel Bearing

One Rear Wheel Bearing &  Hub Assembly For Jeep Patriot MK 2007

You can also recognize a defective wheel bearing if there is too much play. Jack up your Jeep Patriot until the wheel can move freely. Then grab the wheel with both hands at the opposite sides and alternately press and pull. If the play is clearly noticeable and visible, then the wheel bearing is very likely defective. However, this technique requires some experience and a practiced grip.

You May Like: Who Are The Moderate Republicans In The Senate

Car Has Abnormal Handling

If you drive your car nearly everyday, youre probably familiar with how it feelsand especially when it feels different.The handling in your car may start to shift if you have a dying rear wheel bearing. Your car will start to feel loose, which is really the feeling of your wheel starting to become disconnected and loose. Not a good thing. And not a good feeling.Youll also likely feel your car pulling a little bit to the left or the right – depending on which rear wheel bearing is dying – when youre trying to drive in a straight line.


How Long Do The Wheel Bearings Last In Jeep Patriot

Under normal driving conditions, wheel bearings typically last around 100,000 miles. The mileage depends on the driving style and the quality of the wheel bearing. If you frequently drive your Patriot on bad roads with lots of potholes, drive over curbs with force or drive quickly around corners, the service life of the wheel bearings is significantly reduced.

You May Like: Cowboys Vs Patriots Game Live

How Does A Wheel Bearing Work

A wheel bearing is part of the front and rear wheel hubs. In the front, the hub connects the wheel to the suspension’s steering knuckle. The wheel connects to the hub, and the hub spins smoothly inside the wheel bearing. This allows the weight of the vehicle to rest on the hub as it spins while maintaining as little surface contact as possible.

The wheel bearing is lubricated with grease in order to further reduce friction. Most vehicles feature sealed wheel bearings that encapsulate the ball bearings and the lubricant.

How Long Does It Take To Change A Wheel Bearing

2010 Jeep Patriot/Compass Rear Wheel Bearing Replacement C1044

Replacing a single wheel bearing of Patriot typically takes 1 to 2 hours for an experienced mechanic. Sometimes it can take longer if the wheel hub is stuck, it then requires a lot of hammering or use of different tools and techniques to remove the hub. There are also a lot of moving parts that need to be removed and then properly reinstalled to complete the task. Due to the complexity and sheer manual labor, it is not recommended as a DIY project.


Recommended Reading: Joe Biden Republican Vice President

Will A Bad Wheel Bearing Affect Abs

Wheel bearings are safety-relevant components. They are responsible for stable driving behavior and, depending on the version, provide the wheel speed information for the anti-lock braking system. If the wheel bearing is defective, the anti-lock braking system can also be disabled. In the event of emergency braking, this has a negative effect on the braking distance and the steerability of the vehicle.

Jeep Wheel Bearing+hub Patriot 24 Rear L/r 2010

JEEP WHEEL BEARING+HUB PATRIOT 2.4 REAR L/R 2010

Vehicle Fitment:

COMING SOON

Part Compatibility:


We have done our utmost to identify vehicle compatibility. To be certain this part fits your vehicle, please use the contact us form and supply us with your VIN/ Chassis number. This is a 17 digit unique number and is found either on your vehicle license disk or on the interior door label. There is no guarantee that this item will fit your vehicle without a compatibility check, as there are variations between models.

Pricing:

Pricing is subject to availability and may differ from the price shown on screen, based on stock quantity and availability.

Delivery:

  • Orders are processed within 1 – 2 working days
  • Door to door courier service
  • Select your delivery method at checkout
  • Please allow extra time for remote areas

Recommended Reading: What Republicans Are Still Running For President


Grinding Or Humming Noise

Grinding or humming noise in the cabin of Patriot from the direction of the affected wheel is one of the earliest signs of a bad wheel bearing. The faster you drive your vehicle, the louder the humming noise gets. Damage to the wheel bearing is not easy to notice in the preliminary stages, as the noise is barely noticeable. In many cases, however, the noise builds up after a short time often after a few hundred miles.

Is It Safe To Drive With A Bad Wheel Bearing

Dodge Caliber Jeep Compass Patriot Rear Wheel Hub Bearing Assembly ...

The short answer is: Not for too long. Having bad wheel bearings can range from inconvenient and unpleasant to downright dangerous.

If you have bad wheel bearings, you might experience the vehicle pulling to one side, sloppy or loose steering, grinding and rattling noises, and uneven tire wear.

In the worst case scenario, the wheel could come off while you drive.

We recommend you consult the professionals and make a service appointment here on KBB.com.


Also Check: What Are Differences Between Democrats And Republicans

What Causes Bearings To Fail In Jeep Patriot

Even when driving your Patriot in a straight line, the bearings have to absorb high radial forces. The entire weight of the vehicle rests on the bearings. When driving, the speed creates additional forces. If a curve is then also driven through, axial forces occur. High impacts on the bearings also occur on uneven roads or when driving through potholes. Impacts of all kinds are much more damaging to bearings than the high loads. Therefore, all wheel bearings eventually fail. However, how soon they fail depends on driving habits. Other factors can also contribute to premature bearing failure on your Patriot, like driving with unbalanced tires or poor wheel alignment.

Is It Safe To Drive With A Wheel Bearing Problem

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

Also Check: Foxpro Patriot Electronic Game Call

How Often Do Wheel Bearings Need Servicing Or Replacement

Most vehicles have sealed bearings that do not require maintenance. Sealed bearings can last 100,000 miles or more, and will need to be replaced once they go bad.


Vehicles with traditional, tapered wheel bearings should have them serviced every 25,000 to 30,000 miles replacement may not be necessary as long as they’re maintained.

Bad Rear Wheel Bearing

2014 Jeep Patriot Rear Wheel Bearing Replacement, REALLY Loud!

“Nothing is either good or bad, but thinking makes it so.”- William Shakespeare”I swear to drunk I’m not God!”- Anonymous

“Nothing is either good or bad, but thinking makes it so.”- William Shakespeare”I swear to drunk I’m not God!”- Anonymous

todde702 said:I know it’s a bad bearing because when I turn right at speed , the noise gets very loud with a rhythmic pounding vibration coming from the rear. When I turn left the noise goes away almost completely with very little vibration. The noise has been growing slowly, I first thought it was just a bad tire from my $80 craigslist purchase. It always stayed a steady sound no matter which way I turned. But now it’s very evident it’s a rear wheel bearing.

“Nothing is either good or bad, but thinking makes it so.”- William Shakespeare”I swear to drunk I’m not God!”- Anonymous

TOOLS

You May Like: Who Is The Other Republican Running For President

Can I Drive With A Bad Wheel Bearing

Yes, but not for long. As the wear increases, so do the chances of damage occurring to other parts of the suspension.

If you suspect that a wheel bearing is beginning to wear, have a technician evaluate the problem as soon as possible. A vehicle with a significantly worn wheel bearing shouldn’t be driven. If the wheel bearing fails completely, it’s possible for the wheel to come off the vehicle and cause a wreck.


How Do Mechanics Replace Wheel Bearings

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position , and the drive type :

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Don’t Miss: Patriots Mitchell And Ness Jersey

How Long Will The Wheel Bearings Last On My Jeep

In theory, wheel bearings could last as long as your Jeep. Unlike oil changes or tire rotations, theres no standard maintenance schedule for replacing them. However, wheel bearings can be damaged if you hit a pothole, smack into a curb or bounce over a speed bump too fast.

If water, grit, salt or sand get to the bearings, the grease in the hub assembly gets contaminated. This will wear down the bearings, and they will eventually give out.

The best course of action? Find a reputable service technician for advice.


Say Goodbye To Your Wheel

OE Replacement for 2007

If you ignore everything in this article, then heres what youll end up with: Three wheels. The rear wheel bearings will give you signs of aging as they start to die. Once they fully die, theyll actually disintegrate, and then the wheel has no way of being supported. And at that point it will fly free.

You May Like: Patriot Home Mortgage St George Utah

Is It Safe To Drive Patriot With A Bad Wheel Bearing

A wheel bearing is located within the wheel hub, and is responsible for connecting the wheel to the vehicle. If you continue driving your Patriot with a bad wheel bearing for months, in worse case scenario the wheel can lock up while driving or even fall off. Therefore a bad wheel bearing must be replaced as soon as possible when symptoms first appear.

Should I Replace Only The Defective Wheel Bearing In Patriot

In general, it is advisable to change the second bearing on the same axle even if there is only one defective wheel bearing in your Jeep Patriot. It can be assumed that both bearings were subjected to roughly the same stress and that the failure of the second bearing is imminent. If they are replaced at the same time, this saves time and money.

Also Check: Early Voting Republican Primary Texas

Premature Wheel Bearing Failure Due To Contamination

When the wheel bearing rotates, there is high friction. Therefore, the internal components must be lubricated with lubricants such as grease or oil to prevent overheating. The wheel bearings in Jeep Patriot are designed in such a way that they are absolutely maintenance-free. This is achieved with a grease filling that ensures adequate lubrication of the rolling elements over the entire service life of the wheel bearing.

Elaborately designed seals ensure that neither water nor dirt can enter the wheel bearing. But if the seals fail, water and dirt can enter inside the wheel bearing and contaminate the lubricant. These contaminants circulate throughout the grease and between the races and the bearings accelerating the wear rate. The increased heat may break down and eventually expel the lubricant, leading to premature failure of the bearing.

Make Sure It Fits Your Vehicle

Jeep Patriot Rear Wheel Bering Replacement

From$109.99

  • G2 Axle and Gear Wheel Bearing Kits provide you with the necessary items to replace your front or rear wheel bearings.
  • Prevents dust and debris from entering the bearing protector
  • Bearing protector maintains pressure and keeps bearing greased
  • With CURT wheel bearing protectors, you can ensure that your wheels keep turning, quiet as a mouse
  • G2 Axle and Gear Front Wheel Bearing Kit
  • For use in Dana 44/GM 10 Bolt
  • All Parts For One Side
  • Timken Inner Wheel Bearing and Race
  • Timken Outer Wheel Bearing and Race
  • Wheel Bearing Seal

Free! Curbside & In-Store Pickup:

  • Want this professionally installed??

    • G2 Axle and Gear Front Wheel Bearing Kit
    • For use in Dana 44/GM 10 Bolt
    • All Parts For One Side
    • Timken Inner Wheel Bearing and Race
    • Timken Outer Wheel Bearing and Race
    • Wheel Bearing Seal

    Free! Curbside & In-Store Pickup:

  • Want this professionally installed??

    • G2 Axle and Gear Rear Wheel Bearing Kit
    • For use in GM 14 Bolt 10.5in.
    • Inner Wheel Bearing And Race
    • Outer Wheel Bearing And Race
    • All Parts For One Side
    • Image is a representation of this item. Actual item may vary

    Also Check: Are There More Democrats Or Republicans In The Senate

    Popular Articles