If Youre Going Deep Its Gotta Have Free Fall
DEEP WATER ANCHORING IS A BREEZE WITH THE REBEL SERIES STANDARD AUTO DROP FREE FALL SYSTEM!
Unlike the direct drive transmissions of the HERO and PATRIOT series, the REBEL series drum anchor winches have a clutch and friction plate design to allow the drum to free spool when the clutch plate is dis-engaged. A quick 2 second push of the lower button rotates the clutch plate and your anchor line is released to free spool, dropping your anchor to the bottom at the fastest drop speeds possible. Once your anchor line is fully deployed, press and hold the raise button for 5 seconds, the clutch plate will again rotate this time clamping down on the drum and holding the boat at anchor. If you choose to temporary suspend the REBEL’s Auto Drop FREE FALL feature and operate in a “power down” mode, just loosen the clutch block set screw on the side of the base-plate and lower the clutch block preventing it from interacting with the clutch plate. To return Auto FREE FALL, just raise the clutch block to the top of the slot and tighten the set screw.
You Cant See It But Its There
E-Z Anchor Puller REBEL series drum anchor winches have an internal structural frame stiffener inside the drum shaft. This internal frame stiffener connects both upper sides of the base plate increasing the strength of the winch and preventing high torque wobble of the drum.REBEL series drum anchor winches series also have an internal spring around the drive shaft that keeps constant pressure against the braking plate which prevents the drum from back-lashing once the anchor hits the bottom after free fall.
As you know, 316 stainless steel is the most desired material for equipment on the deck of a boat. Other winch manufacturers have made stainless steel sleeves to slide over and cover standard off-the-shelf motors to prevent external corrosion, but the big problem is internal condensation. The standard motor housed inside the stainless steel sleeve or cover still rusts or corrodes.
Our Patented stainless steel motors are manufactured as stainless steel, not standard motors, adapted with a cover or sleeve. E-Z Anchor Puller motors use a patented system to mitigate internal condensation by filling the gaps inside the motor with high temperature plastic to reduce the internal atmosphere and lock the magnets in place.
What Ez Anchor Puller Do You Need
- What diameter and length of rope do you intend to have on your anchor winch?
- A diameter of 1/8″ for every 9ft of boat length
- A minimum length of 3 times the depth of water you intend to anchor in.
- Capacity Chart along with the Spool Size’s for Hero series Anchor Pullers are estimated from Ingersoll Rand’s Drum Capacity Estimator.
- EZ Anchor’s chart is only for estimations and do not guarantee it will match other brands methods and results.
You May Like: How Can I Support President Trump
Ez Anchor Puller Patriot Series Ez
The EZ Anchor Puller Patriot Series of 316 Stainless Steel direct drive drum anchor winch’s use direct drive transmissions that offer power up and down. The Patriot Series feature a 316 Stainless Steel Gearbox and Motor. EZ Anchor Pullers are used by SeaVee, Kingfisher, Hewes, Duckworth, Weldcraft and many more boat builders!
The Patriot Series EZ-2 is meant for boats in lengths from 21′ – 24′ and have a power up and down direct drive. The suggested application is shallow coastal salt water.
The EZ-2 is shipped via UPS Ground. For shipments to Alaska, Hawaii or outside the US please contact us for shipping quotes. Your order will be voided if you purchase this part outside the lower 48 states.
